USE:

CEKOL ZM-01 is used for building walls of bricks, gas concrete, ceramsit concrete and other elements. Joint width not less than 8 mm. CEKOL ZM-01 may also be used for all kind of masonry and repair work inside and outside buildings.

PROPERTIES:

CEKOL ZM-01 is a factory made dry mixture of cement, properly selected fillers and modifying additives. CEKOL ZM-01 is frost and water resistant.

BASE PREPARATION:

The brick and block surface should be clean, compact and carrying. In the case of repair work, clean the surfaces of paint, grease, loose plaster particles etc.

APPLICATION:

Pour the package contents to cold water in the proportion of 0.16 to 0.18 liter of water for 1 kg of dry powder and mix thoroughly with a bucket mixer. Mix is ready for use immediately after mixing and maintains its properties, depending on the ambient temperature, for about 2 hours. If the mixture thickens, mix it thoroughly again without adding water. Apply the mix with a trowel or float. All the work should be carried out in compliance with the building craft and industrial safety principles.

TECHNICAL DATA:

The mix meets the requirements of PN-EN 998-2 GM5
Mixture proportions: 4.0 to 4.5 l of water for 25 kg of dry powder
Pot life: about 2 hours
Consumption: 1.7 kg/m2 for 1 mm thick layer
Minimum layer thickness: 8 mm
Work temperature: +5^oC to +25^oC
Compression strength: ≥ 5 MPa
Reaction to fire: A1
Product has the National Institute of Hygiene (PZH) Attestation

PACKAGING:

Paper bags - 25 kg

STORAGE:

Store in original packages, in a dry compartment.
Shelf life up to 12 months.