USE:

CEKOL ZML-61 is a masonry mortar of high thermo-insulating qualities, preventing heat leakage bridges from existence. CEKOL ZML-61 is used for building external walls from cellular concrete, ceramsit concrete, ceramic blocks and other elements.

PROPERTIES:

CEKOL ZML-61 is a factory made dry mixture of cement, mineral fillers, modifying additives and light aggregate. The use of light aggregate makes the thermo-insulating properties of the mortar much better than those of an ordinary cement-lime mortar. This eliminates the heat leakage bridges in joints. The heating energy economy is thus improved. CEKOL ZM-01 is easy to use and economic and has good base adherence.

BASE PREPARATION:

The base should be clean, compact and carrying, free of grease, dust and dirt.

APPLICATION:

Pour the package contents to cold water in the proportion of 0.40 to 0.50 liter of water for 1 kg of dry powder and mix thoroughly. Pour adequate amount of water and the whole bag contents to a concrete mixer. Mix for about 5 minutes. If the work temperature is high, wet the blocks.

TECHNICAL DATA:

The mix meets the requirements of PN-EN 998-2 LM5
Mixture proportions: 0.4 to 0.5 l of water for 1 kg of dry powder
Pot life: about 2 hours
Consumption: depends on layer thickess, about 3 kg/m2 for 5 mm thick layer
Minimum layer thickness: 5 mm
Maximum layer thickness: 10 mm
Work temperature: +5^oC to +25^oC
Compression strength: ≥ 5 MPa
Product has the National Institute of Hygiene (PZH) Attestation

PACKAGING:

Paper bags

STORAGE:

Store in original packages, in a dry compartment.
Shelf life up to 12 months.